fixed ssh

DEV_ENV

@@ -42,6 +42,8 @@ similar to python's virtualenv but for the entirety of my system.
 - [ ] Make a way for me to put my laptop in a low power state, doing very specific actions like:
 		1. disabling LSP use by default temporarily
 
+- [ ] Add https://github.com/levnikmyskin/hyprland-virtual-desktops
+
 TODO:
 - [X] make btop theming declarative
 - [ ] Merge laptop and PC dotfiles repos

btop.conf.bak

@@ -0,0 +1,248 @@
+#? Config file for btop v. 1.4.0
+
+#* Name of a btop++/bpytop/bashtop formatted ".theme" file, "Default" and "TTY" for builtin themes.
+#* Themes should be placed in "../share/btop/themes" relative to binary or "$HOME/.config/btop/themes"
+color_theme = "Default"
+
+#* If the theme set background should be shown, set to False if you want terminal background transparency.
+theme_background = True
+
+#* Sets if 24-bit truecolor should be used, will convert 24-bit colors to 256 color (6x6x6 color cube) if false.
+truecolor = True
+
+#* Set to true to force tty mode regardless if a real tty has been detected or not.
+#* Will force 16-color mode and TTY theme, set all graph symbols to "tty" and swap out other non tty friendly symbols.
+force_tty = False
+
+#* Define presets for the layout of the boxes. Preset 0 is always all boxes shown with default settings. Max 9 presets.
+#* Format: "box_name:P:G,box_name:P:G" P=(0 or 1) for alternate positions, G=graph symbol to use for box.
+#* Use whitespace " " as separator between different presets.
+#* Example: "cpu:0:default,mem:0:tty,proc:1:default cpu:0:braille,proc:0:tty"
+presets = "cpu:1:default,proc:0:default cpu:0:default,mem:0:default,net:0:default cpu:0:block,net:0:tty"
+
+#* Set to True to enable "h,j,k,l,g,G" keys for directional control in lists.
+#* Conflicting keys for h:"help" and k:"kill" is accessible while holding shift.
+vim_keys = False
+
+#* Rounded corners on boxes, is ignored if TTY mode is ON.
+rounded_corners = True
+
+#* Default symbols to use for graph creation, "braille", "block" or "tty".
+#* "braille" offers the highest resolution but might not be included in all fonts.
+#* "block" has half the resolution of braille but uses more common characters.
+#* "tty" uses only 3 different symbols but will work with most fonts and should work in a real TTY.
+#* Note that "tty" only has half the horizontal resolution of the other two, so will show a shorter historical view.
+graph_symbol = "braille"
+
+# Graph symbol to use for graphs in cpu box, "default", "braille", "block" or "tty".
+graph_symbol_cpu = "default"
+
+# Graph symbol to use for graphs in gpu box, "default", "braille", "block" or "tty".
+graph_symbol_gpu = "default"
+
+# Graph symbol to use for graphs in cpu box, "default", "braille", "block" or "tty".
+graph_symbol_mem = "default"
+
+# Graph symbol to use for graphs in cpu box, "default", "braille", "block" or "tty".
+graph_symbol_net = "default"
+
+# Graph symbol to use for graphs in cpu box, "default", "braille", "block" or "tty".
+graph_symbol_proc = "default"
+
+#* Manually set which boxes to show. Available values are "cpu mem net proc" and "gpu0" through "gpu5", separate values with whitespace.
+shown_boxes = "cpu mem net proc"
+
+#* Update time in milliseconds, recommended 2000 ms or above for better sample times for graphs.
+update_ms = 2000
+
+#* Processes sorting, "pid" "program" "arguments" "threads" "user" "memory" "cpu lazy" "cpu direct",
+#* "cpu lazy" sorts top process over time (easier to follow), "cpu direct" updates top process directly.
+proc_sorting = "memory"
+
+#* Reverse sorting order, True or False.
+proc_reversed = False
+
+#* Show processes as a tree.
+proc_tree = False
+
+#* Use the cpu graph colors in the process list.
+proc_colors = True
+
+#* Use a darkening gradient in the process list.
+proc_gradient = True
+
+#* If process cpu usage should be of the core it's running on or usage of the total available cpu power.
+proc_per_core = False
+
+#* Show process memory as bytes instead of percent.
+proc_mem_bytes = True
+
+#* Show cpu graph for each process.
+proc_cpu_graphs = True
+
+#* Use /proc/[pid]/smaps for memory information in the process info box (very slow but more accurate)
+proc_info_smaps = False
+
+#* Show proc box on left side of screen instead of right.
+proc_left = False
+
+#* (Linux) Filter processes tied to the Linux kernel(similar behavior to htop).
+proc_filter_kernel = False
+
+#* In tree-view, always accumulate child process resources in the parent process.
+proc_aggregate = False
+
+#* Sets the CPU stat shown in upper half of the CPU graph, "total" is always available.
+#* Select from a list of detected attributes from the options menu.
+cpu_graph_upper = "Auto"
+
+#* Sets the CPU stat shown in lower half of the CPU graph, "total" is always available.
+#* Select from a list of detected attributes from the options menu.
+cpu_graph_lower = "Auto"
+
+#* If gpu info should be shown in the cpu box. Available values = "Auto", "On" and "Off".
+show_gpu_info = "Auto"
+
+#* Toggles if the lower CPU graph should be inverted.
+cpu_invert_lower = True
+
+#* Set to True to completely disable the lower CPU graph.
+cpu_single_graph = False
+
+#* Show cpu box at bottom of screen instead of top.
+cpu_bottom = False
+
+#* Shows the system uptime in the CPU box.
+show_uptime = True
+
+#* Show cpu temperature.
+check_temp = True
+
+#* Which sensor to use for cpu temperature, use options menu to select from list of available sensors.
+cpu_sensor = "Auto"
+
+#* Show temperatures for cpu cores also if check_temp is True and sensors has been found.
+show_coretemp = True
+
+#* Set a custom mapping between core and coretemp, can be needed on certain cpus to get correct temperature for correct core.
+#* Use lm-sensors or similar to see which cores are reporting temperatures on your machine.
+#* Format "x:y" x=core with wrong temp, y=core with correct temp, use space as separator between multiple entries.
+#* Example: "4:0 5:1 6:3"
+cpu_core_map = ""
+
+#* Which temperature scale to use, available values: "celsius", "fahrenheit", "kelvin" and "rankine".
+temp_scale = "celsius"
+
+#* Use base 10 for bits/bytes sizes, KB = 1000 instead of KiB = 1024.
+base_10_sizes = False
+
+#* Show CPU frequency.
+show_cpu_freq = True
+
+#* Draw a clock at top of screen, formatting according to strftime, empty string to disable.
+#* Special formatting: /host = hostname | /user = username | /uptime = system uptime
+clock_format = "%X"
+
+#* Update main ui in background when menus are showing, set this to false if the menus is flickering too much for comfort.
+background_update = True
+
+#* Custom cpu model name, empty string to disable.
+custom_cpu_name = ""
+
+#* Optional filter for shown disks, should be full path of a mountpoint, separate multiple values with whitespace " ".
+#* Begin line with "exclude=" to change to exclude filter, otherwise defaults to "most include" filter. Example: disks_filter="exclude=/boot /home/user".
+disks_filter = ""
+
+#* Show graphs instead of meters for memory values.
+mem_graphs = True
+
+#* Show mem box below net box instead of above.
+mem_below_net = False
+
+#* Count ZFS ARC in cached and available memory.
+zfs_arc_cached = True
+
+#* If swap memory should be shown in memory box.
+show_swap = True
+
+#* Show swap as a disk, ignores show_swap value above, inserts itself after first disk.
+swap_disk = True
+
+#* If mem box should be split to also show disks info.
+show_disks = True
+
+#* Filter out non physical disks. Set this to False to include network disks, RAM disks and similar.
+only_physical = True
+
+#* Read disks list from /etc/fstab. This also disables only_physical.
+use_fstab = True
+
+#* Setting this to True will hide all datasets, and only show ZFS pools. (IO stats will be calculated per-pool)
+zfs_hide_datasets = False
+
+#* Set to true to show available disk space for privileged users.
+disk_free_priv = False
+
+#* Toggles if io activity % (disk busy time) should be shown in regular disk usage view.
+show_io_stat = True
+
+#* Toggles io mode for disks, showing big graphs for disk read/write speeds.
+io_mode = False
+
+#* Set to True to show combined read/write io graphs in io mode.
+io_graph_combined = False
+
+#* Set the top speed for the io graphs in MiB/s (100 by default), use format "mountpoint:speed" separate disks with whitespace " ".
+#* Example: "/mnt/media:100 /:20 /boot:1".
+io_graph_speeds = ""
+
+#* Set fixed values for network graphs in Mebibits. Is only used if net_auto is also set to False.
+net_download = 100
+
+net_upload = 100
+
+#* Use network graphs auto rescaling mode, ignores any values set above and rescales down to 10 Kibibytes at the lowest.
+net_auto = True
+
+#* Sync the auto scaling for download and upload to whichever currently has the highest scale.
+net_sync = True
+
+#* Starts with the Network Interface specified here.
+net_iface = ""
+
+#* Show battery stats in top right if battery is present.
+show_battery = True
+
+#* Which battery to use if multiple are present. "Auto" for auto detection.
+selected_battery = "Auto"
+
+#* Show power stats of battery next to charge indicator.
+show_battery_watts = True
+
+#* Set loglevel for "~/.config/btop/btop.log" levels are: "ERROR" "WARNING" "INFO" "DEBUG".
+#* The level set includes all lower levels, i.e. "DEBUG" will show all logging info.
+log_level = "WARNING"
+
+#* Measure PCIe throughput on NVIDIA cards, may impact performance on certain cards.
+nvml_measure_pcie_speeds = True
+
+#* Horizontally mirror the GPU graph.
+gpu_mirror_graph = True
+
+#* Custom gpu0 model name, empty string to disable.
+custom_gpu_name0 = ""
+
+#* Custom gpu1 model name, empty string to disable.
+custom_gpu_name1 = ""
+
+#* Custom gpu2 model name, empty string to disable.
+custom_gpu_name2 = ""
+
+#* Custom gpu3 model name, empty string to disable.
+custom_gpu_name3 = ""
+
+#* Custom gpu4 model name, empty string to disable.
+custom_gpu_name4 = ""
+
+#* Custom gpu5 model name, empty string to disable.
+custom_gpu_name5 = ""

gitkraken_issue_solution

@@ -0,0 +1,10 @@
+If gitkraken won't work make sure:
+
+The ssh-agent is running and "$SSH_AUTH_SOCK" equals "$XDG_RUNTIME_DIR/ssh-agent"
+(this is the known ssh-agent issue I've already solved).
+
+Next make sure whatever you're cloning/etc from is in your ~/.ssh/known_hosts file
+(if using ssh). Gitkraken may fail to do this automatically. ie for gitlab run:
+```sh
+ssh-keyscan -t rsa github.com >> ~/.ssh/known_hosts
+```

gitkraken_themes

@@ -0,0 +1 @@
+https://jonbunator.github.io/gitkraken-custom-themes/#dracula---source

homes/me/default.nix

@@ -16,6 +16,7 @@
     ../modules/fish.nix
     ../modules/editor/helix.nix
 
+    ../modules/btop.nix
     ../modules/rio.nix
     ../modules/firefox.nix
     ../modules/nixcord.nix
@@ -89,6 +90,25 @@
     # these are both required for home-manager to work
     home-manager.enable = true;
 
+    # set ssh profiles
+    # (all we need is hyrule, everything else is through wishlist)
+    # NOTE: (IMPORTANT) this DOES NOT start the ssh-agent
+    #       for that you need to use `services.ssh-agent-enable`
+    ssh = {
+      enable = true;
+      forwardAgent = true;
+      addKeysToAgent = "yes"; # always add keys to ssh-agent
+
+      matchBlocks = {
+        hyrule = {
+          hostname = "imbored.dev";
+          user = "ae";
+          port = 22;
+          identityFile = "/home/me/.ssh/id_hyrule";
+        };
+      };
+    };
+
     ags = {
       enable = true;
       configDir = ./ags;
@@ -131,6 +151,11 @@
     */
   };
 
+  # enable OpenSSH private key agent
+  services.ssh-agent.enable = true;
+  # the ssh-agent won't set this for itself...
+  systemd.user.sessionVariables.SSH_AUTH_SOCK = "$XDG_RUNTIME_DIR/ssh-agent";
+
   # ----- SERVICES -----
   # Nicely reload system units when changing configs
   systemd.user.startServices = "sd-switch";

homes/modules/btop.nix

@@ -0,0 +1,79 @@
+{config, ...}: {
+  programs.btop = {
+    enable = true;
+
+    settings = {
+      # Theming
+      color_theme = "dracula";
+      theme_background = true;
+      truecolor = true;
+      force_tty = false;
+      vim_keys = false; # allow vim keybindings
+      # Units
+      clock_format = "%I:%M %p, %b %d";
+      temp_scale = "celsius";
+      base_10_sizes = false; # use KB or KiB
+
+      # UI
+      background_update = true;
+      update_ms = 2000;
+      rounded_corners = false;
+      graph_symbol = "braille"; # braille/block/tty
+      graph_symbol_cpu = "default";
+      graph_symbol_mem = "default";
+      graph_symbol_net = "default";
+      graph_symbol_proc = "default";
+
+      # Processes Window
+      proc_left = true; # show on left side of window
+      proc_colors = true;
+      proc_gradient = true;
+      proc_per_core = false; # false: % of ALL cores
+      proc_mem_bytes = false; # show mem usage as %
+      proc_sorting = "cpu lazy";
+      proc_filter_kernel = false; # hide kernel child processes
+      proc_tree = false;
+
+      # CPU Window
+      cpu_bottom = false; # display at bottom of window
+      show_uptime = true;
+      show_cpu_freq = true;
+      check_temp = true; # show cpu temp
+      show_coretemp = true; # show temp per core
+      cpu_graph_upper = "total"; # upper graph shows total CPU usage
+      cpu_graph_lower = "user"; # lower graph shows user's CPU usage
+      cpu_invert_lower = true;
+      cpu_single_graph = false; # disable lower graph
+      show_gpu_info = "Off"; # Auto/On/Off
+      gpu_mirror_graph = false; # horizontally mirror gpu graph
+
+      # Memory Window
+      mem_below_net = false; # show below net window
+      mem_graphs = true; # show graphs not meters
+      show_swap = true; # show swap memory usage
+      # Disks Subwindow
+      show_disks = true; # split mem box to show disk info
+      swap_disk = true; # show swap memory as disk
+      show_io_stat = true;
+      io_graph_combined = false; # combine read/write stats
+      io_mode = true; # show io stat as graph
+      use_fstab = true; # read disk list from /etc/fstab
+      only_physical = false; # ignore non-physical disks
+
+      # Network Window
+      net_iface = ""; # default network interface to monitor
+      net_auto = true; # overrides net_download/net_upload (below)
+      net_sync = false; # sync download/upload graph scales
+      net_download = 100; # max download speed graphed
+      net_upload = 100; # max upload speed graphed
+
+      # Battery
+      show_battery = true;
+      selected_battery = "Auto";
+      show_battery_watts = true;
+
+      # Other
+      log_level = "WARNING"; # ERROR/WARNING/INFO/DEBUG
+    };
+  };
+}

homes/modules/hypr/hyprland.nix

@@ -0,0 +1,2 @@
+# NOTE: hyprland must be enabled in BOTH your host config (for running hyprland)
+#       and your home-manager config (for managing hyprland's config files)

hosts/lolcathost/default.nix

@@ -132,6 +132,9 @@ in {
           # for graphical applications
           flatpak
           gnome-software
+
+          jetbrains.rider
+          gitkraken
         ];
       };
 
@@ -181,7 +184,8 @@ in {
     easyeffects
     ani-cli
     wl-clipboard # clipboard for wayland
-    kcalc # TEMP: (FOR TESTING)
+
+    pavucontrol
 
     (callPackage ./sddm-theme-corners.nix {}).sddm-theme-corners
     # dependencies for my sddm theme:

modules/hyprland/default.nix

@@ -1,12 +1,12 @@
-{ 
+# NOTE: hyprland must be enabled in BOTH your host config (for running hyprland)
+#       and your home-manager config (for managing hyprland's config files)
+{
   pkgs,
   inputs,
   config,
-  lib, 
-  ... 
-}: 
-
-{
+  lib,
+  ...
+}: {
   options.hyprland = {
     enable = lib.mkEnableOption "Hyprland";
   };
@@ -17,7 +17,7 @@
       #package = inputs.hyprland.packages.${pkgs.system}.hyprland;
       xwayland.enable = true;
     };
-    
+
     xdg.portal = {
       enable = true;
       extraPortals = with pkgs; [
@@ -26,5 +26,5 @@
     };
 
     # TODO: finish this (I didn't like the dotfiles I was getting inspo from and stopped)
-  };    
+  };
 }